| Posted by: Lemonde - 25 July 2023 11:29:44 |
|---|
| Help! I have replaced an H700 that fizzed out But the new one appears to be in direct mapping' mode which halts the system. Perc H700 Attached enclosure doesn't support in controller's Direct mapping mode Please contact system support. System has halted due to unsupported configuration I cannot get into the RAID config to turn it off - what can I do here? |
| Posted by: Lemonde - 25 July 2023 14:13:33 |
|---|
| So what we had to do was this: We put the controller in a PC/workstation and booted it into Windows We downloaded the CLI for the AVAGO megaraid from Dell We ran the command: perccli /c0 disable directpdmapping=off where 0 is the adapter ID Then after a reboot we ran: perccli /c0 show directpdmapping and got: Controller = 0 Status = Success Description = None Controller Properties : ===================== ---------------------- Ctrl_Prop Value ---------------------- Directpdmapping OFF ---------------------- So now we'll try booting the system.... |